Home » Applications » LXI Products » LXI Power Supplies

LXI Power Supplies

 

PL-P

PL-P Series Linear DC Power Supplies
TTi (Thurlby Thandar Instruments)

  • Fully compliant to LXI Class C specification.
  • Linear regulation with very low noise and fast transient recovery.
  • Single or dual outputs, up to 180 watts.
  • Bench or rack mounting, quarter rack 3U (single), half rack 3U (dual).
  • Front and rear terminals, switched local or remote sense.
  • Low current range with sub -milliamp resolution.
  • RS-232, USB and LAN interfaces, plus analog, plus optional GPIB.

           For more information >>

qpx

QPX1200L PowerFlex DC Power Supply
TTi (Thurlby Thandar Instruments)

  • Fully compliant to LXI Class C specification.
  • PowerFlex regulation auto-ranges within a 1200 watt limit.
  • Voltage and current combinations between 60V/20A and 20V/50A.
  • Linear final regulation provides low ripple and noise.
  • Bench or rack mounting with front and rear terminals.
  • RS-232, USB and LAN interfaces, plus analog, plus optional GPIB.

           For more information >>

 

n8700

N8700 Series System DC Power Supplies (3.3 kW & 5 kW)
Agilent Technologies

  • Fully compliant to LXI Class C specification
  • Choose from 21 models: up to 5200 W, up to 600 V, up to 400 A
  • Small, high-density 2U package
  • LAN, USB, and GPIB interfaces standard on all models
  • Flexible AC input voltage options: 230 VAC single-phase, 208 & 400 VAC 3-phase

           For more information >>

 

xr

 

XR Series »
Magna-Power Electronics
  • 2 kW, 4 kW, and 6 kW Programmable DC Power Supply in 2U
  • Highest power density programmable DC power supply in a 2U package at 6 kW
  • 54 Models with voltage ranges from 0-1000 Vdc and current ranges from 0-375 Adc
  • Wide range of input voltages available: from 208 Vac to 480 Vac, at 50 Hz, 60 Hz, and 400 Hz
  • High efficiency operation: models with up to 88% efficiency
  • Automatic voltage/current crossover
  • High power factor: greater than 92% at maximum power
  • Master/slave series and parallel capability
  • Optically isolated user I/O circuitry standard: No additional isolation circuitry necessary
  • Fully Compliant to Class C Specification

            For more information >>

ts

TS Series III »
Magna-Power Electronics

  • 5 kW to 45 kW Programmable DC Power Supply

  • 150 Models with voltage ranges from 0-4000 Vdc and current ranges from 0-2700 Adc

  • Wide range of input voltages available: from 208 Vac to 480 Vac, at 50 Hz, 60 Hz, and 400 Hz

  • High efficiency operation: models with up to 88% efficiency

  • Automatic voltage/current crossover

  • High power factor: greater than 92% at maximum power

  • Master/slave series and parallel capability

  • Optically isolated user I/O circuitry standard: No additional isolation circuitry necessary

  • Fully Compliant to Class C Specification

            For more information >>

ms

MS Series III »
Magna-Power Electronics

  • 30 kW to 75 kW Programmable DC Power Supply

  • 84 Models with voltage ranges from 0-4000 Vdc and current ranges from 0-4500 Adc

  • Wide range of input voltages available: from 208 Vac to 480 Vac, at 50 Hz, 60 Hz, and 400 Hz

  • High efficiency operation: models with up to 88% efficiency

  • Automatic voltage/current crossover

  • High power factor: greater than 92% at maximum power

  • Master/slave series and parallel capability

  • Optically isolated user I/O circuitry standard: No additional isolation circuitry necessary

  • Fully Compliant to Class C Specification

            For more information >>

mt

MT Series IV »
Magna-Power Electronics

  • 100 kW to 600 kW+ Programmable DC Power Supply

  • 140 Models with voltage ranges from 0-4000 Vdc and current ranges from 0-24000 Adc

  • Wide range of input voltages available: from 208 Vac to 480 Vac, at 50 Hz, and 60 Hz

  • High efficiency operation: models with up to 92% efficiency

  • Automatic voltage/current crossover

  • High power factor: greater than 92% at maximum power

  • RS-232 communications standard

  • Master/slave series and parallel capability

  • Optically isolated user I/O circuitry standard: No additional isolation circuitry necessary
  • Fully Compliant to Class C Specification

            For more information >>

N5700

N5700 Series System DC Power Supplies (750 W & 1.5 kW)
Agilent Technologies

  • Fully compliant to LXI Class C specification.
  • Choose from 24 models: up to 1500 W, up to 600 V, up to 180 A.
  • Operate on LAN, GPIB and USB interfaces.
  • Supports parallel and series connections of multiple supplies.
  • Simplify cabling with built-in measurements.

           For more information >>

N6700

N6700 Low-Profile Modular Power System »
Agilent Technologies

  • Fully compliant to LXI Class C specification.
  • Create a system of  up to 4 outputs of up to 300 W/output in 1U of rack space.
  • Change output voltage in as fast as 200 microseconds.
  • Synchronize to other events with hardware and software triggering.
  • Capture transients with built-in digitizer (up to 50 kHz, 4096 points).
  • Generate automated sequencing of up to 512 output settings.

              For more information >> 

 

Sorensen DLM 600-W Programmable DC Power Supply»
AMETEK Programmable Power
  • Fully compliant to LXI Class C specification.
  • Compact package with high power density - 1U half-rack.
  • Master/Slave up to 31 units through an Ethernet connection.
  • Mix and match  DLM600 and DCS slaves under one LXI controlled unit.
  • Near linear ripple (rms) and noise (p-p).
  • Fast transient response and built in down programming. 
  • Maximum flexibility via simple series and parallel operations.

            For more information>>
Sorensen DCS Series  1-kW, 1.2-kW and 3-kW Programmable DC Power Supplies»
AMETEK Programmable Power

  • Fully compliant to LXI Class C specification.
  • Master/Slave up to 31 units through an Ethernet connection.
  • Compact package with high power density - 1U (1 kW, 1.2 kW) to 2U (3 kW).
  • Mix and match DLM600 and DCS slaves under one LXI controlled unit.
  • Wide range of output voltages.
  • Near linear ripple (rms) and noise (p-p).
  • Maximum flexibility via simple series and parallel operations.

            For more information>>

Sorensen SGA and SGI Series 5-kW to 30-kW and 40-V to 600-V Programmable DC Power Supplies
AMETEK Programmable Power
  • Fully compliant to LXI Class C specification.
  • High power density: up to 15 kW in a 3U; 30 kW in a 6U chassis.
  • Widde voltage range: 0-40 V up to 0-600 V, in increments of kW from 5 to 30 kW.
  • Sequencing: Program custom waveforms.
  • Hardware trigger.
  • Near linear ripple (rms) and noise (p-p).
  • Fast transient response and built in down programming. 
  • Maximum flexibility via simple series and parallel operations.

            For more information>>
KLP 1U Series
Kepco,Inc.
  • Fully compliant to LXI Class C specification.
  • Hyperbolic PowerTM Limit expands the full power operating region.
  • Built-in GPIB, isolated analog and LXI programming at no extra cost.
  • 1U panel height to 1200 W.
  • Front-to-back air flow allows full power operation without spacers between supplies.
  • Wide range a-c input, 85-265 Vac with Active PFC.

            For more information>>

 

 

Genesys™ Half Rack 750W AC/DC Programmable Power»
Lambda Americas

  • Fully compliant to LXI Class C specification

  • Wide Range Input 80-265VAC, PF 0.99, CE Mark

  • RS-232/RS-485 Standard

  • Outputs from 6VDC to 600VDC and up to 100A

  • Identical interfaces across all Genesys (TM) platforms

  • Parallel Current Sum standard; control up to four identical units to program and readback 0-400A

  • Zero stack in rack for maximum density

            For more information>>

 
Genesys™ 1U Full Rack 750W & 1500W AC/DC Programmable Power»
Lambda Americas

  • Fully compliant to LXI Class C specification

  • Wide Range Input 80-265VAC, PF 0.99, CE Mark

  • RS-232/RS-485 Standard

  • Outputs from 6VDC to  600VDC and up to 200A

  • Identical interfaces across all Genesys (TM) platforms

  • Parallel Current Sum standard; control up to four identical units to program and readback 0-800A

  • Zero stack in rack for maximum density

            For more information>>

 

Genesys™ 2U Full Rack 3300W AC/DC Programmable Power
Lambda Americas

  • Fully compliant to LXI Class C specification

  • Popular Single (PF 0.99) and Three Phase (PF 0.94) Inputs, CE Mark\

  • RS-232/RS-485 Standard

  • Outputs from 8VDC to 600VDC and up to 400A

  • Identical interfaces across all Genesys (TM) platforms

  • Parallel Current Sum standard; control up to four identical units to program and readback 0-1,600A

  • Zero stack in rack for maximum density

            For more information>>

 
Genesys™ 3U Full Rack 10kW & 15kW AC/DC Programmable Power
Lambda Americas

  • Fully compliant to LXI Class C specification

  • Popular Three Phase Inputs, 208VAC, 400VAC, Passive PFC, CE Mark. 480VAC, UL Recognized

  • RS-232/RS-485 Standard

  • Outputs from 7.5VDC to 600V and up to 1,000A

  • Identical interfaces across all Genesys (TM) platforms

  • Parallel Current Sum standard; control up to four identical units to program and readback 0-4,000A

  • Zero stack in rack for maximum density

            For more information>>